Skip to the content
Pete Yates Painting and Decorating

Service

Surface Preparation and Finishing Before Any Paint

Surface preparation and finishing means filling, sanding, priming and sealing surfaces before any paint is applied. Good preparation is what makes the final finish look right, so Pete treats it as a job in its own right. Pete is a sole trader working from Bognor Regis.

Much of the work that decides how a room looks happens before the paint tin is opened. Pete treats that work as a job in its own right.

This page explains what preparation involves and what to expect. General facts are attributed to named sources such as Dulux, HSE and Festool, and they are context for you, not a description of Pete's own methods.

What counts as preparation?

Preparation means filling, sanding, priming and sealing surfaces. All of it happens before any paint is applied.

Good preparation is what makes the final finish look right, which is why it is not treated as an afterthought.

What do paint makers say about preparing surfaces?

Dulux guidance says to sand or fill flaws before colour, and that new plaster can take up to 4 weeks to dry completely.

For outside walls, Dulux lists washing down, treating mould, filling and a stabilising primer.

What comes after preparation?

The decorating is completed, and the job ends with a final review where you look round the work with Pete.

Finishing is clean and tidy, with the surfaces left in the state you would want to see.

Questions

What are the four parts of preparation?

Filling, sanding, priming and sealing. Filling deals with holes and flaws, sanding smooths the surface, and priming and sealing get it ready for paint. All four happen before any paint is applied.

Why is preparation treated as a job in its own right?

Good preparation is what makes the final finish look right. Pete treats it as a job in its own right rather than a minor step, so each surface gets the attention it needs before the paint goes on.

What do surfaces need before colour goes on?

Dulux guidance says flaws should be sanded or filled before colour. Anything uneven or damaged is dealt with first, so the paint is applied to a smooth surface instead of being asked to cover problems.

How is new plaster made ready for paint?

Dulux says new plaster can take up to 4 weeks to dry completely, and gives a mist coat of 10 parts paint to 1 part water. This is paint-maker guidance, and Pete assesses each wall before deciding what it needs.

Is mould dealt with before painting outside?

Dulux guidance for exterior walls lists treating mould as one of the steps before painting, alongside washing down, filling and applying a stabilising primer. Pete cleans down and prepares exterior surfaces before paint goes on.

Does older paint change how a surface is prepared?

It can. HSE guidance says lead was a pigment in common paint until the early 1980s, and that sound paintwork should be left alone unless it is flaking. Pete assesses the work before preparing surfaces.

Does preparation create dust?

Sanding does. Festool describes the principle of a sander connected to an extractor that captures dust at the tool. Pete's dustless sanding collects most of the dust as the work is done, leaving far less mess.

Does preparation apply to woodwork as well as walls?

Yes. Interior work includes walls, ceilings, doors, skirting boards and other woodwork, all prepared first. Exterior surfaces such as masonry, render and exterior woodwork are cleaned down and prepared before paint is applied.

Where does preparation sit in the order of a job?

It is the third step in Pete's general outline: discuss the project, assess the work, prepare the surfaces, complete the decorating, then a final review. The exact steps depend on the property.

What does finishing mean at the end of a job?

Finishing is the clean and tidy completion of the work, followed by the final look round with Pete. Preparation comes first, and the quality of the finish is judged afterwards, when you can see the result.

Contact

Request a Quote

Call Pete on 07472 311 520 or fill in the enquiry form. Include your town or postcode, the service you need and a few details about the project.

07472 311 520

pdyates3@yahoo.co.uk

Bognor Regis, West Sussex

Your details go to Pete. He will be in touch about your job.

Can't get through? Send the form and your details go to Pete.